top of page

Optical Temperature Sensors

Due to their fast response time (as low as <1 second), PyroScience optical temperature sensors are ideal for pairing with optical oxygen sensors for true temperature compensation. They can also be used as standalone sensors for independent temperature measurements. Choose from a variety of fiber-optic and contactless sensor options. Make sure to select all necessary accessories for the contactless sensor options.

Needle Type Temperature Minisensors

Temperature Sensor Spots

Specifications

Fiber-Optic Temperature Sensors Options for Gases and Liquids
Robust temperature probes and mini sensors, response time (t90 < 1s), with optical isolation

  • TPROBSC: robust probe, 4mm diameter, 10cm long, 2m cable, 2 screw cap sensors per package

  • TPR430: retractable fiber mini sensor, 430µm tip diameter, 40mm needle length, 2m cable

  • TPB430: bare fiber mini sensor, 430µm tip diameter, 2m cable

  • TPF1100: fixed mini sensor, 430µm tip diameter (protrudes 2mm), 1.2mm needle diameter, 2m cable

  • TPROBSC-SUB: same as TPROBSC, but with underwater connector -SUB instead of -ST connector

  • TPR430-SUB: same as TPR430, but with underwater connector -SUB instead of -ST connector

  • TPB430-SUB: same as TPB430, but with underwater connector -SUB instead of -ST connector

  • TPF1100-SUB: same as TPF1100, but with underwater connector -SUB instead of -ST connector

TPROBSC.jpg

TPROBSC

Contactless Temperature Sensor Options for Gases and Liquids
Sensor spots, flow-through cells, sensor vials for measurements in closed containers

Specifications

  • TPSP5: temperature spots, autoclavable, response time (t90 < 1s), requires SPGLUE silicon glue

  • TPSP5-ADH: temperature spots, autoclavable, response time (t90 < 1s), self-adhesive

  • TPSP5-ADH-STER: same as TPSP5-ADH, sterilized

  • TPFLOW: temperature flow-through cell, sterilized using 25kGy beta-irradiation, requires SPFIB-BARE

  • TPFTC2: flow-through cell, recommended flow rate: 20-500 mL/min DISCONTINUED

  • TOVIAL20: 20 mL vial with integrated oxygen & temperature sensor, autoclavable

  • PHTOVIAL20-PK7: 20 mL vial with integrated pH (6-8 pH range) & oxygen & temperature sensors

  • PHTOVIAL20-PK8: 20 mL vial with integrated pH (7-9 pH range) & oxygen & temperature sensors

  • PHTVIAL20-PK7: 20 mL vial with integrated pH (6-8 pH range) & temperature sensors

  • PHTVIAL20-PK8: 20 mL vial with integrated pH (7-9 pH range) & temperature sensors

TPSP5.jpg

TPSP5

Fiber Opt Temp Sensors
Contactless Temp Sensors

Necessary Accessories for Sensor Spots, Vials and Flow-through Cells

Compatible with Oxygen, pH and Temperature Contactless Sensors

  • SPFIB-BARE: optical fiber, for contactless readout, to measure through 0-2mm thickness, 1m length

  • SPFIB-LNS: optical fiber with lens, to measure through 3-10mm thick materials, 1m length

  • SPADBAS: Basic spot adapter, compatible to SPFIB-BARE, PICFIB2 or PICROD2, SPGLUE for fixation

  • SPFIB-BARE-CL2: same as SPFIB-BARE, 2m length

  • SPFIB-LNS-CL2: same as SPFIB-LNS, 2m length

  • SPFIB: optical fiber, for contactless readout, to measure through 0-2mm thickness, 1m length, ST-connector on both ends

  • SPGLUE: Transparent silicone glue Elastosil E43, (ca. 90 ml), for fixing sensor spots or SPADBAS

  • SPGLUE-KIT: Glueing kit with 1 spoon spatula (SPTLA), disposable syringe with screw cap, Luer-Lock fixture, 5 flat needles

  • SPTLA: 300mm long spatula for handling sensor spots, to position and fix sensor spot during gluing

  • ADVIAL20T: Adapter ring for 20mL vials with up to 3 sensors, compatible to SPFIB-BARE and PICFIB2

  • ADVIAL4T: Adapter ring for 4mL vials with up to 2 sensors, compatible to SPFIB-BARE and PICFIB2

  • SEPVIAL4: Septa with lids (with and without hole), for replacement in 4mL sensor vials

  • SEPVIAL20: Septa with lids (with and without hole), for replacement in 20mL sensor vials

  • ADPATCH: adhesive sticker patches, for piercing with protected O2 minisensors

  • PICFIB2: fiber for contactless readout with PICO-type meters only, for 0-10mm thick walls, 1m length

  • PICROD2: optical fiber rod, with PICO-connector, for 0-10mm thick walls, ca. 40mm length

  • PICROD3: optical fiber rod, PICO-connector, Ø = 3mm, 51.5mm length, for 0-20mm thick walls

  • PICFIB2-LNS: same as PICFIB2 but for 0-20mm thick walls

  • PICROD2-LNS: same as PICROD2 but with focusing lens, ideal for microfluidics

  • SPFIB-LNS-SUB: same as SPFIB-LNS, but with underwater SUB-connector (SUB)

  • SPFIB-LNS-CL2-SUB: same as SPFIB-LNS-CL2, but with underwater SUB-connector (SUB)

SPFIB-BARE-7cfc2246.jpg

SPFIB-BARE

top of page
accessories
bottom of page